Golden yellow headlight film gives clear lenses a bold, solid yellow cast instead of just a tint. At 13% light transmission, it's dark enough to fully change the beam color at night, closer to the classic yellow fog light look than a light color wash.
The finish is high gloss and fully saturated, so the color reads the same in daylight as it does when the lights are on. This is a statement color, built for, who want the beam itself to change character, not just the lens tone during the day.
It installs dry with an air-release channel liner, so it presses on and squeegees into place without a slip solution. The adhesive is acrylic-based and repositionable before the final press, and a protective top layer peels away once the film is fully seated. Fits headlights, taillights, fog lights, and marker light housings.
Features And Specifications
Rated for 1 year of outdoor use on vertical surfaces like headlights and taillights
Lets about 13% of light through for a bold, solid yellow beam instead of a light tint
Resists moisture, humidity, and everyday water exposure without lifting
Stands up to heat, UV rays, and minor scratches without cracking or fading
High-gloss finish that goes on clean and wipes down easily during regular washing
Comes with a protective top layer that peels away right before installation
Acrylic adhesive that grips firmly but stays repositionable until you press it down for good
Slides into place so you can adjust it before locking in the final position
Installs dry with air-release channels for bubble and crease-free application
Fits headlights, taillights, fog lights, and marker light housings, indoors or out
Sizes available: 1ft, 2ft, 4ft, 8ft, 16ft, and 32ft.
Application Method: Apply on a clean, dry surface.
Proper Installation
If the headlight surface is clean and undamaged before installation, the wrap adheres evenly and removes smoothly.
Proper Removal Technique
Using gentle heat (like a heat gun or hairdryer) softens the adhesive, making it easier to peel without pulling or tearing the headlight’s factory coating.
Warning
If the headlights are already oxidized, yellowed, or have weak factory coating, peeling the wrap can pull off clear coat or cause flaking.
Physical Properties
Classification
Unit
Spec
Remark
Thickness
Top protected film
um
25um±2
25um(PE)
Adhesive
um
20um±1
20mu
Surface materials
um
100um±2
98um
Release liner
um
185um±5
182mu Paper Liner
Physical Performance
Features
Test Method
Results
Light Transmission
>10%
13%
Adhesive residue
/
<3%
Release force (N/25mm)
<0.4N
0.18N
Initial tack (g/25mm)
600 - 800g
650g
180° Peel Strength (N/25mm)
10 - 13
12
Holding power(h)
>24hours
48H No Peeling
Aging Test
7 days under 65°C
No adhesive residue under 25 times wrapping
Shrinkage
3mm
2mm
Time Limits
Must use it within 3 months after you receive the wrap film
3 Months
Shelf Life
2 years from date of purchase when stored at 50°F to 80°F (15°C – 25°C) and 45% to 50% relative humidity. The optimum recommended storage conditions are 72°F (22°C) and 50% relative humidity.
Important Notice
Information on physical and chemical characteristics and values in this document are based upon tests we believe to be reliable and do not constitute a warranty. They are intended only as a source of information and are given without guarantee and do not constitute a warranty. Purchasers should independently determine, prior to use, the suitability of this material for their specific use. All technical data are subject to change. In case of any ambiguities or differences between the English and foreign versions of this document, the English version shall prevail and lead.
Warranty, Limited Remedy, And Disclaimer
Unless an additional warranty is specifically stated on the applicable VinylFrog product packaging or product literature, VinylFrog warrants that each VinylFrog product meets the applicable VinylFrog product specification at the time VinylFrog ships the product.VinylFrog MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the VinylFrog product does not conform to this warranty, then the sole and exclusive remedy is, at VinylFrog’s option, replacement of the VinylFrog product or refund of the purchase price.
Limitation Of Liability
Except where prohibited by law, VinylFrog will not be liable for any loss or damage arising from the VinylFrog product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability.
Produk Terkait
Clear Holographic Honeycomb Headlight Film with Air Channel Paper Liner